Netgear n150 wnr1000v3 Wireless Router WPS Configuration

You can easily setup your Netgear n150 wnr1000v3 wireless router either through the SSID setup or through the WiFi Protected Setup(WPS) for configuring your Netgear n150 wnr1000v3 wireless router. In this article we will explain about all the steps that are involved for WPS setup for Netgear n150 wnr1000v3 wireless router.

Netgear n150 wnr1000v3 Wireless Router WPS Configuration

Two Ways for Using WPS for Netgear n150 wnr1000v3 Wireless Router

You can use the first method only when SSID and security options have already been setup. For your Netgear n150 wnr1000v3 wireless router if the SSID and security options have already been setup then you can use the steps given below. These steps will add your Netgear wireless router to the home network without any complications.

  1. First of all you need to press the WPS button located on your Netgear n150 wnr1000v3 wireless router. The moment you press the WPS button on your Netgear n150 wnr1000v3 wireless router it will start transmitting the WiFi signals.
  2. Now you need to press the WPS button on your wireless device that you want to add to your home network.

After following these steps you will see that the LED on your Netgear n150 wnr1000v3 wireless router will start blinking and if the WPS connection is configured properly then the LED on your wireless router will turn into solid green color.

First method is only used when the Netgear n150 wnr1000v3 wireless router options are not properly configured. You need to configure the SSID and the wireless security for Netgear n150 wnr1000v3 wireless router properly if these parameters are not configured properly. You need to follow the below mentioned steps for setting up the SSID for Netgear n150 wnr1000v3 wireless router.

  1. Using the URL http://routerlogin.net you need to access the Netgear n150 wnr1000v3 wireless router login page and fill up the login details like: Username and Password and then proceed further to the next step.
  2. Now you need to select the “Wireless Settings” option and note down the default SSID name.
  3. Now you need to select the region for Netgear n150 wnr1000v3 wireless router.
  4. Now simply save all the settings by clicking on “Save” button.